New improved DIN-Rail size version with wider time range and easier setting.
12Vdc powered 2 minutes to 3 hours 30 minutes delay timer module with mains rated relay output. Delay is user adjustable using two time scales. When activated the relay turns on for the user-set time period.
Timer is activated by the Start input (using for example a push button or relay contact closure). The timing cycle is non-retriggerable and will be completed regardless of further Start inputs or if the Start input remains closed after activation. A new timing cycle can only commence once the current timing cycle has finished.
Optional Power-Start mode. Start input disabled. Relay turns on and delay countdown commences immediately power is applied to the board. Relay turns off at timeout. Power must be removed and reapplied for a fresh countdown to commence. Power-Start mode is set using a header jumper (not included - Order Code JUMPER-RED).
The delay period is adjustable using the time scale switch and onboard potentiometer.
An LED indicates when the relay is on. The board is reverse polarity protected.
Other similar versions of this board are available:
Specifications| Supply Voltage | 12V dc |
| Power Supply Options | Power Supply Module: CFE103 or UK Plug Power Supply: 660.446UK with connector 777.001UK |
| Current Consumption | 50mA |
| Delay times | Scale A: 2 to 21 minutes Scale B: 22 minutes to 3 hours 30 minutes |
| Activation | Contact closure or Power-Start |
| Output | 1 x SPDT Relay |
| Maximum Output Load (Resistive) | Up to 240Vac or 28Vdc @ 7 Amps max. (Relay Datasheet) |
| Maximum Output Load (Inductive) | Up to 240Vac @ 2 Amps max. |
| Relay Connections | NO, NC, C (Relay FAQ) |
| Dimensions (WxDxH) | ~ 72 x 42 x 30 mm |
| DIN-RAIL Mount | C7562 |
| Enclosure | WCAH2853 |
| Product Format | PRE-ASSEMBLED Electronic Module Product Format Info |
