12Vdc 3A power supply built into a sealed in-line housing. Mains power input is via a 2-pin fig.8 socket (UK mains lead supplied) and output is on a hard-wired lead terminated with a 5.5 x 2.1mm DC plug.
Stable and reliable power supplies for LED tape, CCTV and other equipment.
Features| Input voltage | 100-240Vac, 47/63Hz |
| Output current max. | 3A (3,000mA) |
| Power max. | 36W |
| Adaptor plug | 5.5 x 2.1mm DC plug |
| Output voltage | 12Vdc |
| Output lead length | 1.2m |
| IP rating | IP20 |
| Dimensions | 118 x 50 x 32mm |
| Weight | 208g |
| Note | To connect this power supply to electronic circuit boards with solder post, solder pad or screw terminal block power connections we suggest that you also purchase a DC socket like Order Code 777.001UK so that you do not have to cut the moulded plug off the power supply lead. |
| Product selection advice | The equipment that you wish to power (the load) must draw less current than the power supply's maximum rated current specified above. We recommend that the power supply's current rating is at least 20% above the expected load current. |
| N.B. This power supply is is NOT suitable for use in North America and most European countries. It is intended for use with British Standard BS1363 style 3-pin style mains sockets as used in United Kingdom, Ireland, Hong Kong, Malaysia and Singapore. We recommend that you purchase an equivalent power supply locally if your country is not included in this list. | |
